|
||||||||||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page 
|
||||||||||
| Part | Price | Thickness | Width | Length | Material | Lead | Notes | |||
| 5H | $3.00 | 0.187" | 0.250" | 0.500" | Copper M | N/A | Figure 4NS | |||
| 24H | $3.00 | 0.204" | 0.157" | 0.375" | Copper M | N/A | Figure 4NS | |||
| 15H | $3.00 | 0.243" | 0.243" | 0.437" | Copper M | N/A | Figure 4NS | |||
| 9H | $3.00 | 0.250" | 0.250" | 0.437" | Copper M | N/A | Figure 4NS | |||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page 
|
||||||||||
| Part | Price | Thickness | Width | Length | Material | Lead | Notes | |||
| 408 | $4.50 | 0.093" | 0.250" | 0.938" | Copper M | N/A |
Figure 628 Hole is 0.095" diameter |
|||
| 273SS | $4.50 | 0.250" | 1.000" | 0.625" |
Copper M W-19 |
N/A |
Figure 4UU, 0/15 bevels, Studebaker Siren |
|||
| JX115.2 | $5.00 | 0.255" | 0.705" | 0.625" | Copper M | N/A | Figure 7033 | |||
| 7033 | $4.50 | 0.250" | 0.750" | 0.625" | Copper M | N/A |
Figure 7033 Delco |
|||
| 55-287561 | $5.24 | 0.281" | 0.750" | 0.656" | Copper M | N/A |
Figure 628 Yale |
|||
| 55-287562 | $5.24 | 0.281" | 0.750" | 0.656" | Copper M | N/A |
Figure 628 High copper |
|||
| 1SHL | $11.50 | 0.312" | 0.625" | 1.000" | Copper M | N/A |
Figure 303 Holes are 0.175" diam. and 0.275" C-C |
|||
| GCB107 | $22.02 | 0.312" | 1.375" | 1.000" | Copper M | N/A |
Figure 303 0.750" c-c |
|||
| GCB109 | $30.52 | 0.312" | 1.375" | 2.000" | Copper M | N/A |
Figure 628 0.156" hole |
|||
| 7033X | $4.50 | 0.315" | 0.996" | 0.750" | Copper M | N/A |
Figure 628N Hole diameter: 0.200" |
|||
| GCB110 | $16.48 | 0.336" | 1.396" | 2.000" | Copper M | N/A |
Figure 628 0.187" hole |
|||
| RX87 | $2.00 | 0.375" | 0.750" | 0.750" | Copper M | N/A | Figure 628N | |||
| 1ECP | $13.75 | 0.375" | 1.500" | 1.250" | Copper M | N/A |
Figure 303 Holes are 0.220" diam. and 0.812" C-C |
|||
| GCB114 | $12.33 | 0.500" | 1.250" | 1.375" | Copper M | N/A | Figure 628 | |||
| GCB114T | $29.80 | 0.500" | 1.750" | 1.750" | Copper M | N/A |
Figure 303, 0/15 bevels Holes are 0.187" diam. and 0.500" C-C |
|||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page 
|
||||||||||
| Part | Price | Thickness | Width | Length | Material | Lead | Notes | |||
| L4-6H | $4.95 | 4mm | 6mm | 10mm | Copper M | 28mm | Figure 4 | |||
| 8H | $3.60 | 0.250" | 0.250" | 0.437" | Copper M | 1.000" | Figure 4 | |||
| 20H | $3.90 | 0.250" | 0.250" | 0.500" | Copper M | 3.000" | Figure 4 | |||
| 23H | $3.95 | 0.250" | 0.250" | 0.500" | Copper M | 3.000" |
Figure 4 0/20 bevels |
|||
| 8078488 | $19.28 | 0.312" | 0.690" | 1.375" | Black E | 2.125" insulated | Figure 4H, 0/33.5 bevels, EMD Delco | |||
| L8-10H | $7.34 |
0.315" 8mm |
0.393" 10mm |
0.750" 19mm |
Copper M | 50mm | Figure 276, Bosch | |||
| L343-688M | $18.50 | 0.343" | 0.688" | 0.750" | Copper M | 2.000" insulated |
Figure 118A Terminnal: D-0.146" |
|||
| L343-1EG | $15.71 | 0.343" | 1.000" | 1.000" | Black E | 2.750" insulated |
Figure 1F, Intrupa Terminal: O-0.219" |
|||
| L10-12.5MG | $13.86 |
0.393" 10mm |
0.492" 12.5mm |
0.900" 23mm |
Copper M | 34mm |
Figure 2, with dust slots Terminal: D-3.8mm |
|||
| L500-112 | $19.36 | 0.500" | 1.500" | 2.000" | Gray E | 4.250" |
Figure 4, C&H Crane Terminal: U-0.281" bent 90o |
|||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page 
|
||||||||||
| Part | Price | Thickness | Width | Length | Material | Lead | Notes | |||
| L3-5H | $8.86 | 3mm | 5mm | 10.5mm | Copper M | 30mm | Figure 91 | |||
| OH0438 | $3.00 | 0.125" | 0.250" | 0.500" | Copper M | 0.375" |
Figure 91 w/notch, no terminal |
|||
| L4-4HA | $3.95 |
0.157" 4mm |
0.157" 4mm |
0.276" 7mm |
Copper M | 40mm |
Figure 91K w/stop notch |
|||
| L4-4H | $4.37 |
0.157" 4mm |
0.157" 4mm |
0.315" 8mm |
Copper M | 31mm |
Figure 91 w/notch, no terminal |
|||
| L4-6Hside | $4.00 |
0.157" 4mm |
0.236" 6mm |
0.295" 7.5mm |
Copper M | 27mm |
Figure 148 no terminal |
|||
| L4-6 | $4.00 |
0.157" 4mm |
0.236" 6mm |
0.500" 13mm |
Copper M | 35mm |
Figure 91 no terminal |
|||
| L4-7H | $7.97 |
0.157" 4mm |
0.275" 7mm |
0.500" 13mm |
Copper M | 35mm |
Figure 91 no terminal |
|||
| L4-8M45 | $4.00 |
0.157" 4mm |
0.315" 8mm |
0.393" 10mm |
Copper M | 38mm |
Figure 91 no terminal |
|||
| L4-8H | $8.40 |
0.157" 4mm |
0.315" 8mm |
0.500" 13.5mm |
Copper M | 34mm |
Figure 91K no terminal |
|||
| 11H | $4.34 | 0.187" | 0.187" | 0.375" | Copper M | 1.250" |
Figure 91 no terminal |
|||
| L5-5H | $4.50 |
0.196" 5mm |
0.196" 5mm |
0.500" 13mm |
Copper M | 38mm |
Figure 91K no terminal |
|||
| 1-127-014-017 | $9.00 |
0.196" 5mm |
0.315" 8mm |
0.768" 19.5mm |
Copper M | 50mm insulated |
Figure 91TH no terminal w/spring |
|||
| L5-10H | $6.75 |
0.196" 5mm |
0.394" 10mm |
0.670" 17mm |
Copper M | 34mm |
Figure 91 no terminal, slip ring |
|||
| M7 | $4.50 | 0.205" | 0.205" | 0.444" | Copper M | 1.375" |
Figure 91 Ford, no terminal |
|||
| L218-017T-10 | $17.46 | 0.223" | 0.538" | 1.281" | Copper M | 1.562" insulated |
Figure 112B 0.197" flag terminal |
|||
| GB285 | $6.00 | 0.228" | 0.544" | 0.750" | Gray E | 1.094" |
Figure 112 0.167" flag terminal |
|||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page
|
||||||||||
| L6-6H | $4.40 |
0.236" 6mm |
0.236" 6mm |
0.500" 13mm |
Copper M | 30mm |
Figure 91K, 0/10 bevels no terminal |
|||
| L6-7H | $7.68 |
0.236" 6mm |
0.275" 7mm |
0.500" 13mm |
Copper M | 48mm |
Figure 91J no terminal |
|||
| L6-9H | $7.10 |
0.236" 6mm |
0.354" 9mm |
0.500" 13mm |
Copper M | 45mm |
Figure 91J Lexus radiator fan, no terminal |
|||
| L6-9ST | $7.50 |
0.236" 6mm |
0.354" 9mm |
0.551" 14mm |
Copper M | 45mm |
Figure 91 Denso, no terminal |
|||
| L234H | $8.59 | 0.234" | 0.234" | 0.500" | Copper M | 1.125" |
Figure 91K no terminal |
|||
| 16H | $4.50 | 0.243" | 0.243" | 0.437" | Copper M | 3.000" |
Figure 91K 10/0 bevels |
|||
| Convertible | $4.00 | 0.250" | 0.250" | 0.400" | Copper M | 1.500" |
Figure 91 10/0 bevel, w/notch |
|||
| 13H | $4.96 | 0.250" | 0.250" | 0.625" | Copper M | 3.000" insulated | Figure 91K | |||
| 53H | $5.33 | 0.250" | 0.375" | 0.625" | Copper M | 1.625" | Figure 91 | |||
| 5A1052 | $4.00 | 0.270" | 0.425" | 0.750" | Copper M | 1.312" |
Figure 91 no terminal |
|||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page 
|
||||||||||
| L7-7H | $4.80 |
0.275" 7mm |
0.275" 7mm |
0.500" 12.5mm |
Copper M | 32mm | Figure 91K, no terminal | |||
| L7-10H | $8.50 |
0.275" 7mm |
0.393" 10mm |
0.875" 22mm |
Copper M | 38mm |
Figure 91K12, no terminal, Bosch, PT Cruiser |
|||
| L7-12ST16.1 | $4.00 |
0.275" 7mm |
0.472" 12mm |
0.630" 16mm |
Copper M | 29mm insulated |
Figure 112 no terminal |
|||
| L7-12ST16.2 | $4.00 |
0.275" 7mm |
0.472" 12mm |
0.630" 16mm |
Copper M High % |
34mm |
Figure 112 no terminal |
|||
| L7-12ST19 | $4.00 |
0.275" 7mm |
0.472" 12mm |
0.750" 19mm |
Copper M | 35mm insulated |
Figure 112 no terminal |
|||
| L7-16ST18 | $5.00 |
0.275" 7mm |
0.630" 16mm |
0.708" 18mm |
Copper M | 31mm |
Figure 112 no terminal |
|||
| L7-16ST22T | $7.50 |
0.275" 7mm |
0.630" 16mm |
0.875" 22mm |
Copper M | 30mm |
Figure 112 Terminal D-5mm |
|||
| L7-16ST22 | $5.00 |
0.275" 7mm |
0.630" 16mm |
0.875" 22mm |
Copper M | 34mm |
Figure 112 no terminal |
|||
| L7-19ST | $6.50 | 7mm | 18.75mm | 16mm | Copper M | 35mm insulated |
Figure 112T No terminal, Hitachi |
|||
| L7-25ST | $7.50 | 7mm | 25mm | 16mm | Copper M | 27mm insulated |
Figure 112T No terminal |
|||
| 25H | $7.15 | 0.281" | 0.281" | 0.500" | Copper M | 1.250" |
Figure 91K 0/5 bevels |
|||
| L7.25-8.25H | $14.56 | 7.25mm | 8.25mm | 16.5mm | Copper M | 60mm | Figure 91J | |||
| 54H | $4.50 | 0.312" | 0.312" | 0.500" | Copper M | 1.625" | Figure 91 | |||
| B999 | $8.50 | 0.312" | 0.625" | 1.000" | Copper M | 2.875" |
Figure 231RT Terminal: O-0.190" |
|||
| 7069 | $9.75 | 0.312" | 0.625" | 1.250" | Copper M | 2.500" insulated |
Figure 231RT Terminal: O-0.190" |
|||
| K44 | $5.35 |
0.315" 8mm |
0.315" 8mm |
0.750" 19mm |
Copper M | 54mm |
Figure 91K Mercedes, no term. |
|||
| L8-9H | $8.50 |
0.315" 8mm |
0.354" 9mm |
0.875" 22mm |
Copper M | 47mm |
Figure 5SK 0/15 bevels, no term. |
|||
| L8-12K085 | $14.94 |
0.315" 8mm |
0.472" 12mm |
0.904" 23mm |
Copper M | 50mm insulated |
Figure 112, narrow slot, Terminal: O-4.4mm for Grocery Cart Mover |
|||
| L8-25ST | $6.50 |
0.315" 8mm |
0.630" 16mm |
0.827" 21mm |
Copper M | 45mm insulated | Figure 112T | |||
| L325-375H | $11.50 | 0.325" | 0.375" | 0.635 | Copper M | 1.375" insulated | Figure 91K12 | |||
| GCB9-26 | $14.75 |
0.345" 9mm |
1.016" 26mm |
1.000" 25mm |
Copper M S29 |
1.062", 26mm |
Figure 112D Terminal: D-4mm Crown, Yale |
|||
| L9-13.6H2 | $14.20 |
0.354" 9mm |
0.512" 13mm |
1.000" 25mm |
Copper M | 45mm |
Figure 112, Terminal D-5mm Bosch Lift Gate, Esselman, Pallet Jack, Zepro |
|||
| L9-16.6H2 | $15.14 |
0.354" 9mm |
0.630" 16mm |
1.000" 25mm |
Copper M | 48mm |
Figure 112, Terminal D-4.5mm Pallet Jack Click here for entire brush holder |
|||
| L10-18ST | $20.60 |
0.394" 10mm |
0.709" 18mm |
1.000" 25mm |
Copper M | 65mm |
Figure 91 Terminal O-6.4mm |
|||
| GCB10-33MG | $34.00 |
0.394" 10mm |
1.291" 32.8mm |
0.906" 23mm |
Copper M KK5 |
35mm insulated |
Figure 112D, Skyjack Terminal O-5.2mm or Y-5.2mm |
|||
| GCB101NS | $21.05 | 0.500" | 0.625" | 1.250" | Copper M | 2.000" insulated |
Figure 231, -15/25 parallel bevel, Terminal C-0.195" |
|||
| GCB101EZ | $18.50 | 0.500" | 0.625" | 1.437" | Copper M | 2.000" insulated |
Figure 112, 0/22.5 bevel, Terminal C-0.197" |
|||
| GCB101H100 | $11.76 | 0.500" | 0.625" | 1.437" |
Gray E H100 |
2.000" insulated |
Figure 112, 0/22.5 bevel, Terminal C-0.197" |
|||
| GCB101-4247 | $13.39 | 0.500" | 0.625" | 1.437" | Gray E | 2.000" insulated |
Figure 91, 0/22.5 bevel, Terminal C-0.218" |
|||
| L500-114FL | $29.50 | 0.500" | 1.250" | 1.625" |
Gray E H100 |
2.375" insulated |
Figure 112D, 0/22.5 bevel, Gemcar, Terminal C-0.187" |
|||
|
GCB82918-79 16917-GI |
$10.50 | 16mm | 18mm | 28mm | Copper M | 54mm insulated |
Figure 112, Hitachi, Yamaha Terminal D-5.5mm |
|||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page 
|
||||||||||
| Part | Price | Thickness | Width | Length | Material | Lead | Notes | |||
| L236-545 | $8.00 | 0.236" | 0.545" | 0.625" | Copper M | 1.125" |
Figure 147 Terminal: D-0.125" |
|||
| GCB112 | $12.02 | 0.250" | 0.875" | 1.125" | Copper M | 3.25" insulated |
Figure 65 Terminal: O-0.200" |
|||
| JX115.1 | $8.00 | 0.272" | 0.625" | 0.650" | Copper M | 1.000" insulated |
Figure 147 Terminal: D-0.125" |
|||
| L280-600M | $6.50 | 0.281" | 0.600" | 0.750" | Copper M | 1.812" |
Figure 96 Terminal: O-0.187" |
|||
| FX33 | $7.50 | 0.295" | 0.930" | 0.900" | Copper M | 1.375" |
Figure 147, 0/5 bevel Bent Terminal: O-0.151" |
|||
| 8064A | $5.00 | 0.316" | 0.610" | 0.500" | Copper M | 1.812" |
Figure 147 Terminal: O-0.156" |
|||
| 8064B | $5.00 | 0.316" | 0.610" | 0.500" | Copper M | 1.812" / 2.000" |
Figure 147 Terminal: O-0.156" |
|||
| 7064S | $15.00 | 0.343" | 0.750" | 0.750" | Copper M | 3.500" insulated |
Figure 96 Terminal: U-0.208" |
|||
| 7064SEG | $15.50 | 0.343" | 0.750" | 1.000" | Black E | 2.625" insulated |
Figure 147 Terminal: O-0.281" |
|||
| L375-34MG | $15.15 | 0.375" | 0.750" | 0.812" | Copper M | 1.875" insulated |
Figure 118A Terminal: D-0.197" |
|||
| 51-371751 | $24.97 | 0.375" | 1.750" | 1.000" | Copper M | 2.375" insulated |
Figure 96 Terminal: U-0.281" |
|||
| L10-20MG | $43.50 | 10mm | 20mm | 25mm | Copper M | 45mm insulated |
Figure 96, Cima, Terminal: Y-4.6mm closed |
|||
| L500C | $35.58 | 0.500" | 1.250" | 1.375" | Copper M | 4.000" insulated |
Figure 96, 0.200" diam. hole, 15o bottom bevel Termianl: D-0.222" |
|||
| L500H100 | $15.80 | 0.500" | 1.250" | 1.688" | Gray E | 3.250" insulated |
Figure 96, bottom bevel Terminal: U-0.218" |
|||
| L12.5-32LT | $29.00 | 0.500" (12.5mm) | 1.250" (31.5mm) | 1.100" (28mm) | Copper M | 1.437" (36mm) |
Figure 96, Lift Truck O-0.171" (4.3mm) |
|||
| L500-2.5G | $59.50 | 0.500" | 2.500" | 1.125" | Graphite G | 2.625" insulated |
Figure 96X2 Two terminals: U-0.204" |
|||
| L14-36MG | $39.70 | 14mm | 36mm | 26.5mm | Copper M | 48mm insulated |
Figure 147 Closed terminal: Y-6mm |
|||
| A112A | $17.50 | 0.625" | 1.000" | 1.312" | Gray E | 1.312" |
Figure 96 Terminal: O-0.171" |
|||
| 30-621241 | $21.61 | 0.625" | 1.250" | 1.250" | Graphite G | 1.375" |
Figure 96 Terminal: O-0.175" |
|||
| L625-2TR | $24.95 | 0.625" | 2.000" | 2.250" |
Black E AC137 |
4.000" |
Figure 71K3 Terminal: O-0.343" |
|||
| 9322054 | $39.47 | 0.625" | 2.000" | 2.250" | Black E | 4.500" |
Figure 71KD, Terminal: O-0.281" EMD Delco Traction Motor |
|||
| 24C712P01 | $34.63 | 0.625" | 2.000" | 2.550" |
Black E T900-1, L8 |
4.250" |
Figure 71KT, Terminal: O-0.325" EMD Delco Traction Motor 9322058 |
|||
| 40095316 | $70.40 | 18mm | 38mm | 64mm | Black E | 95mm insulated |
Figure 71KT, Terminal: O-8.7mm EMD DE7000, 62019971 |
|||
| 493X317P06 | $49.77 | 0.750" | 2.250" | 2.295" | Black E | 4.000" tinned |
Figure 71KG, Terminal: O-0.355" GE Locomotive |
|||
| 41B535453P5 | $42.82 | 0.750" | 2.250" | 2.295" | Black E | 4.500" |
Figure 71KG, Terminal: O-0.281" GE Locomotive |
|||
| 8417868 | $43.08 | 0.843" | 1.312" | 2.625" | Black E | 4.250" |
Figure 71KD, Terminal: U-0.343" 0/15 bevels, EMD Delco Railroad |
|||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page 
|
||||||||||
| Part | Price | Thickness | Width | Length | Material | Lead | Notes | |||
| 5A1020 | $5.00 | 0.250" | 0.875" | 0.950" | Gray E | 1.750" |
Figure 11 Terminal: D-0.187" |
|||
| 7020 | $25.38 | 0.281" | 1.000" | 1.125" | Copper M | 2.500" insulated |
Figure 63, 22.5/22.5 bevels, Prestolite Terminal: C-0.187" |
|||
| L406A | $20.45 | 0.406" | 1.000" | 1.375" | Copper M | 2.000" insulated |
Figure 63, 15/20 bevels, Clark MCP-12F, 7AJ, Terminal: O-0.168" |
|||
| L406B | $15.75 | 0.406" | 1.000" | 1.375" | Gray E | 2.813" insulated |
Figure 16, 15/20 bevels Terminal: O-0.168" |
|||
| 8002 | $13.93 | 0.500" | 0.625" | 1.375" | Gray E | 2.500" insulated |
Figure 63, 15/25 bevels, Forklift Terminal: O-0.177" |
|||
| MVB12A | $13.65 | 0.500" | 0.855" | 1.375" | Gray E | 1.500" |
Figure 9slot, 15/20 bevels, Prestolite Terminal: O-0.170" |
|||
| MVB12B | $17.86 | 0.500" | 0.855" | 1.375" | Copper M | 1.500" |
Figure 9slot, 15/20 bevels, Prestolite Terminal: O-0.170" |
|||
|
SR1000-12H3 210089 |
$19.75 | 0.500" | 1.000" | 1.500" | Gray E | 3.000" insulated |
Figure 226P, 22.5/0 bevels, Cummins Terminal: U-0.215", Slip ring |
|||
| 70-501021 | $13.29 | 0.500" | 1.000" | 2.000" | Black E | 4.000" |
Figure 16, 30/25 bevels, EMD Delco Terminal: O-0.170" |
|||
| 8003A | $19.93 | 0.549" | 1.000" | 1.500" | Gray E | 1.437" |
Figure 16, 10/22.5 bevels, Prestolite Terminal: O-0.170" |
|||
| 8003 | $19.43 | 0.549" | 1.000" | 1.500" | Black E | 2.250" insulated |
Figure 63, 10/22.5 bevels, Yale, riveted shunt connections Terminal: O-0.170" |
|||
| 9096991 | $43.00 | 0.625" | 1.000" | 2.000" | Black E | 3.250" |
Figure 90S, 30/30 bevels, EMD Delco Terminal: U-0.218" |
|||
| 5374546 | $34.02 | 0.625" | 1.000" | 2.125" | Black E | 4.000" |
Figure 16, 30/25 bevels, EMD Delco Terminal: U-0.218" |
|||
| 8209085 | $37.38 | 0.625" | 1.312" | 2.625" | Black E | 3.750" |
Figure 90V, 15/30 bevels, EMD Delco Terminal: U-0.281" bent |
|||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page 
|
||||||||||
| Part | Price | Thickness | Width | Length | Material | Lead | Notes | |||
| 8001 | $55.93 | 0.281" | 0.870" | 0.750" | Copper M | 3.250&5.500" | Figure 278Q, Prestolite | |||
| L375-021T | $17.50 | 0.375" | 0.656" | 1.000" | Copper M | 4" insulated + 6" insulated |
Figure 2PRT, Terminal: O-0.192" |
|||
| GCB201EZ | $16.50 | 0.500" | 0.625" | 1.312" | Copper M | 2.312" |
Figure 3CP, 10/12.5 bevels, EZ-GO, Terminal: C-0.215" |
|||
| GCB101PR | $31.50 | 0.500" | 0.625" | 1.500" | Black E |
3.000" & 9.500" insulated |
Figure 112PRT, 0/25 bevels Bolt: ⌀0.306" x 1.625" long GE |
|||
| L500-118PR | $31.20 | 0.500" | 1.125" | 1.375" | Black E |
2.500" + 3.750" insulated for probe |
Figure 9PR, 30/15 bevels, Caterpillar, Mitsubishi Terminals: O-0.212" + probe: QF-0.250" |
|||
| L500-118H | $27.50 | 0.500" | 1.125" | 1.375" | Black E | 2.625" |
Figure 9PR, 30/15 bevels, Hyster Terminal: O-0.212" bent |
|||
| L500-118GE | $34.85 | 0.500" | 1.125" | 1.438" | Gray E |
2.250" insulated + 2.25+4.75" insulated (probe) |
Figure 7PR, 30/15 bevels, GE, Terminals: U-0.281" + probe: QFF-0.281" |
|||
| 324B8400AEP03 | $38.50 | 0.500" | 1.125" | 1.500" | Black E | 2.000" |
Figure 4PRT, 0/15 bevels, GE, Terminal: U-0.187" |
|||
| 955A470P15 | $53.84 | 0.500" | 1.250" | 1.500" | Black E | 2.125" |
Figure 7PR, 30/15 bevels, Rivet lead connection, GE, Terminal: O-0.213" bent |
|||
| 324B8400ADP03 | $38.46 | 0.625" | 1.125" | 1.500" | Black E | 2.750" |
Figure 4PRT, 0/15 bevels, GE, Terminal: U-0.218" |
|||
| L625D | $41.50 | 0.625" | 1.250" | 1.750" | Black E | 2.500" |
Figure 9PR, 30/17.5 bevels, Terminal: O-0.210" bent |
|||
| 10-621251 | $47.50 | 0.625" | 1.250" | 1.750" | Copper M | 2.750" |
Figure 9PR, 35/15 bevels, Terminal: O-0.218" |
|||
| GCB16-25PR | $38.51 | 16mm | 24.5mm | 32mm | Gray E |
90mm + 200mm insulated |
Figure 4PRT Terminal: Z Bolt |
|||
| L687-114K254 | $47.50 | 0.687" | 1.250" | 1.500" | Graphite G | 2.812" insulated |
Figure 147PRT, Terminal: Y-0.250" opening down |
|||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page 
|
||||||||||
| Part | Price | Thickness | Width | Length | Material | Lead | Notes | |||
| LU282M6 | $10.00 |
0.350" / 0.140" |
0.430" | 0.550" | Copper M | 4.500" insulated |
Figure wedge4, M6x1 stud Rover |
|||
| Bosch1 | $25.00 |
0.312" / 0.187" |
0.425" | 0.562" | Copper M | 3.000" / 1.375" |
Figure wedge3 Bosch |
|||
| Bosch2 | $26.50 |
0.275" / 0.187" |
0.505" | 0.630" | Copper M | 4.000" / 2.375" |
Figure wedge3 Bosch |
|||
| LU287 |
$21.50/ set of 2 |
0.200" / 0.380" |
0.500" | 0.700" | Copper M |
1.750" insulated / 3.50" insulated |
Figure wedge3 & wedge4 One Bolt: 6mm-1 x 1.4" tall One has none Rover |
|||
|
Brushes for Automobile Motors, Electric Vehicles and Transportation back to brushes main page 
|
||||||||||
| Part | Price | Thickness | Width | Length | Material | Lead | Notes | |||
| LU282NT | $10.00 |
0.350" / 0.140" |
0.430" | 0.550" | Copper M | 4.500" insulated |
Figure wedge4 Rover |
|||
| LU287 |
$21.50/ set of 2 |
0.200" / 0.380" |
0.500" | 0.700" | Copper M |
1.750" insulated / 3.50" insulated |
Figure wedge3 & wedge4 One Bolt: 6mm-1 x 1.4" tall One has none Rover |
|||
|
|
||||||||||
| Part | Price | Thickness | Width | Length | Material | Lead | Notes | |||
| 4H | $8.00 | 0.187" | 0.187" | 0.375" | Copper M | 1.125" | Figure 201 | |||
| 18H | $5.99 | 0.187" | 0.187" | 0.562" | Copper M | 0.875" |
Figure 201 0.180" cap diameter |
|||
| 3H | $6.46 | 0.187" | 0.187" | 0.625" | Copper M |
No lead, but includes spring 0.173" diam. x 1.562" long |
Figure 252S | |||
| 3HL | $6.96 | 0.187" | 0.187" | 0.875" | Copper M |
No lead, but includes spring 0.173" diam. x 1.562" long |
Figure 252S | |||
| 17H | $5.00 | 0.187" | 0.250" | 0.750" | Copper M | 1.375" |
Figure 201 0.247" cap diameter |
|||
| 7H | $7.00 | 0.187" | 0.375" | 0.750" | Copper M | 1.125" |
Figure 201 0.328" cap diameter |
|||
| 22H | $5.00 | 0.210" | 0.210" | 0.500" | Copper M | 0.875" | Figure 201 | |||
| 21H | $9.64 | 0.250" | 0.250" | 0.437" | Copper M | 3.000" |
Figure 201 10/0 bevels |
|||
| S250E15 | $3.00 | 0.250" | 0.250" | 0.500" | Copper M | 0.500" | Figure 201 | |||
| 6H | $5.00 | 0.250" | 0.250" | 0.625" | Copper M | 1.250" |
Figure 201 0.230" cap diameter |
|||
| S250DR454 | $10.50 | 0.250" | round | 0.585" | Black E |
Spring: 0.175" x 0.437" |
Figure 213D 0.470" flange diameter |
|||
| S300Round | $6.25 | 0.300" | round | 1.000" | Gray E | 1.687" |
Figure 212 0.281" cap diameter |
|||
| S312-58DB | $27.50 | 0.312" | 0.625" | 1.500" | Copper M | 1.500" |
Eared Cap Duffy Boat ElectraCraft Boat |
|||
| S312-34EG | $10.52 | 0.312" | 0.750" | 0.875" |
Black E 6S |
1.625" |
Eared Cap, Crown Pallet Jack 0.815" cap diameter |
|||
| S312-34MG | $13.15 | 0.312" | 0.750" | 0.875" | Copper M | 1.625" |
Eared Cap, Crown Pallet Jack 0.815" cap diameter |
|||
